RYO Vertmix

RYO Vertmix

 

RYO Vertmix

 

Vertmix was designed as a handy CV mixer and processor with buffered inputs but its low-noise circuit means it will also work great with audio.

A 5V offset is normaled to the input of the first channel, giving it a maximum of 5V out turned full clockwise/right or minimum of -5V turned fully counter-clockwise/left. Please note that this offset will affect the mixing if the channel hasn't been patched on its input or output.

It works as 3 channel bipolar mixer,
1 bipolar attenuator + 2 channel bipolar mixer
or 3 bipolar attenuators.

The buffered inputs offer very large resistorless jFET impedance and is unaffected by output impedance (isolation/protection resistors) on the modules going in to the mixer. The inputs without offset voltage is grounded if no patch cable are inserted. If a patch cable is inserted in an input but loose at the other end, the input will be floating (this is modifiable by a resistor between input pin and ground on the input jacks, input impedance will then be equal to this resistors value).
The outputs have 1kohm impedance.

 

Module Parameters
FormatEurorack
Panel Size6HP

Write a review

Please login or register to review
  • Product Code: RYOVERTGRYMSTR
  • Availability: 50
  • from $24.00 TO $24.00
  • Ex Tax: $24.00

Available Options

Tags: ryo, module, assembled, diy, kit, 6hp, eurorack, mixer, attenuator, polarizer, utility