MIDImplant MIDI-CV+Gate, kit, euro 6hp

Out Of Stock MIDImplant MIDI-CV+Gate, kit, euro 6hp (KITRSMIDIECLK06) by synthcube.com

MIDImplant MIDI-CV+Gate, kit, euro 6hp

what do you get when you match up roman sowa's midimplant pcb with a clarke robinson 6hp euro panel?

the only sub-$100 euro format SDIY kit for MIDI-CV+GATE!!

expected date of availablity 15 October 2014

easy to build- one switch, four jacks, two midi-jacks and fewer than 10 solder points at the PCB. Standard euro power cable is included in the kit and easily modified to attach to the PCB and provide power. 

packed with features, the midimplant is unique: 


  • 61 notes range
  • User selectable V/oct or Hz/V
  • Pitch Bend available together with notes at the same CV
  • Fast response - valid CV and Gate 0.3ms after last MIDI byte
  • Voltage accuracy within +/-0.5 cent for 1V/oct scale and +/-2 cents in all other cases
  • User settings via "MIDI-learn" button, or MIDI Sys-Ex
  • User selectable Volt/octave ratio with resolution of about 0.12mV/oct, easily adjusted with use of MIDI keyboard and/or Sys-Ex, no trimming screwdriver needed. CV ofset also possible in range +/-9mV
  • User selectable Hertz/Volt range, covering 1, 2, 3, 4 or 5 octaves (up to 0.16-5V range)
  • Gate output with V-trigger type of gating signal. User selected on-state: power supply level or 0V
  • Gate retrigger, for every new note, or every CV change, or no retrigger
  • posibility to reverse CV: 0V for top note, 5V for lowest note
  • Each output of MIDImplant can be easily configured by the user to generate voltage representation of MIDI signals like:
    • MIDI notes with velocity. One input represents pitch, the other one velocity, while GATE1 controls note duration.
    • MIDI notes on 2 different channels. Each Gate output works together with paired CV output.
    • MIDI pitchbend with full 14-bit resolution
    • Any of 120 available MIDI Continuous Controller, e.g. volume, modulation, etc.
    • Channel Aftertouch, and Polyphonic Aftertouch
    • MIDI Program Change - voltage level represents Program number received via MIDI
  • Both outputs can work independently, that means one can be notes, the other - velocity. Or both can represent pitch of notes on different channels. Or one can be Pitchbender, and the other one - modulation. Combinations are endless.
  • Each output can work on user defined MIDI channel, but if MIDI OMNI ON mode is selected, both outputs respond to MIDI signals on any channel
  • Both CV outputs can generate voltages in range between 0V and 5V
  • MIDI THRU output
  • activity LED
  • dimmensions: 15x25mm (0.6''x1'')


Each MIDImplant is individualy calibrated to match parameters listed above. The calibration process is performed using laboratory 6.5-digit multimeter with base accuracy of 0.0035%. As final check, voltages for all 61 notes in both channels and in both modes (1V/oct and Hz/V) are measured again. All those 244 measurements are supplied to end user together with MIDImplant module. Calibration is performed at 15V power supply and 100k load at CV. Below is example graph for randomly selected MIDImplant. Horizontal axis range is 5 octaves.

Write a review

Please login or register to review
  • Views: 16055
  • Product Code: KITRSMIDIECLK06
  • Availability: Out Of Stock
  • $99.00
  • Ex Tax: $99.00

Tags: midimplant, midi-cv+gate, kit, euro, 6hp, clarke, robinson, (clarke68) eurorack, diy, kits kitrsmidieclk06