Transient Modules

  transient modules 1F vc switch v2 The 1F is a voltage controlled switch, intended to be ‘one friend’ for your sequencer. Its design has been specially focused on working with...

  transient modules 2m dual parallel unity gain mixer The 2M is two unity gain mixers in parallel. Each mixer has level controls for the 3 inputs and also for the output. As its design...

  transient modules 4r quad rvg, kit The 4R is a quad random voltage generator in 2HP. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1...

  Joystick replacement for the Transient 7J.

  transient modules 7j joystick, kit The 7J is a compact joystick controller module. For each axis the joystick can work as an attenuator or attenuverter, selectable via unipolar or bipolar...

  transient modules 8s step sequencer full kit The 8S is an 8 step sequencer in 8 HP with control over parameters of the sequence as reset, hold, random step and direction. It’s been...

  This kit is designed for you to power your breadboard with the common Eurorack voltages – directly from the bus in your case. The kit includes the PCB and all the parts necessary to...

  Midi2TRS is a very simple but handy DIY kit. It does 2 things: • it converts the Midi-DIN input to 3,5mm TRS like it’s used now on many synths and controllers nowdays • it...

  The u1P is a Bernoulli gate. Based on the probability set by the potentiometer, it randomly routes a trigger or gate signal sensed at the input to either of its two outputs. Having three...

  transient modules u2X kit The u2X is a dual buffered multiple with bicolor leds for monitoring signals. Each input is copied into three outputs. As the top section is normalled to the bottom...

  transient modules u3A, kit The u3A is a three channel attenuverter useful for scale, add offset, invert or sum signals. As each input is normalled to +5V, with nothing plugged into the...