Yusynth Sample & Hold + Noise Generator

MOTM panel, 1U

pcb mounting via 2XMFOS universal brackets to panel 

link here: sample hold noise

from yves: 

This single modules integrates two sub-modules : a noise voltage generator and a sample and hold (S&H) processor.

The noise generator generates three different signals : white noise (evenly distributed frequency spectrum), pink noise (1/f frequency spectrum, that is with a 3dB/octave slope), and a slow varying random voltage (frequency smaller than 6Hz).

The Sample and Hold processor has an internal clock but can be driven from an external clock. The clock rate ranges from 0.1Hz to 100Hz. The clock I/O acts either as an clock input or as a clock output depending on the position of the EXT/INT switch. A yellow LED shows the clock rate. A slew rate is also provided (its behaviour either linear or exponential can be selected with a jumper on the PCB).

As a default, the input of the S&H processor is connected to the white noise source.

On Demand Info

These kits and assembled modules are offered on demand, click the link to learn more.