Synths + Kits

  Erica Synths mki x es.EDU Sequencer If you’re new to DIY synthesizer building, you might’ve run into this issue: you just set up your first VCO on a breadboard, spent a good while troubleshooting the stubborn thing – and then...

  Frequency Central Blades of Ingenuity Blades Of Ingenuity is a simple but surprisingly useful module consisting of two elements. Attack/Release generator one shot and looping modes looping mode range 19 Hz to 5 seconds Low Frequency...

  The SSL 1451 JJP SampleCorder module is the long awaited re-issue of our humble tribute to Jean-Jacques Perrey and the early musique-concrete pioneers, where small snips of recording tapes were pieced together into new forms of musical expression...

  Division 6 Business Card Sequencer   The BCS is a tiny 16 step sequencer that provides CV and Gate out. It can also be used as a handheld CV keyboard. Boards for this fun little kit were handed out to everybody who attended Knobcon 2016...

  RYO NOR/OR (Grayscale)   RYO NOR/OR boolean logic module euro, 4hp from ryo:  The NOR/OR module can be patched as two NOT gates, one NOT gate and one 2- or 3-input NOR/OR gate, one 2-input NOR/OR gate and one 2- or 3-input...

  The u1P is a Bernoulli gate. Based on the probability set by the potentiometer, it randomly routes a trigger or gate signal sensed at the input to either of its two outputs. Having three different operating modes (direct, toggle, single), it...

  *** Please note: This item is not eligible for discounts or international shipping.*** Subsequent 25 is a 2-note paraphonic analog synthesizer that melds the hands-on analog soul of classic Moog instruments with the convenience and workflow of a...

  One of Ray Wilson's most popular projects, now available as a DIY synth kit! Comes with the new version 17X7 panel. Find the original MFOS documentation here: MFOS Synth DIY Info   Features Two...

  This small utility is the pedal lover's best friend, it allows 2 diferent chains of pedals to be independently connected to your synth. The Send channels attenuate the synth level to instrument level. The Return channels amplify the signal...

  Scrat is an aggressive sounding multimode Steiner-Parker filter with a twist: You can change the resonance flavour by plugging in components like diodes, capacitors or resistors (even LEDs and/or light-dependent resistors) directly to the front...

  The SSL 1250 Quad LFO combines four dual waveform (sine/square) low frequency oscillators in one convenient 1 MU module. Why tie up four expensive double width VCO modules if all you need are simple vibratos, trills, slowly morphing timbres or...

  Beers 4013 Dual Flip-Flop HP eurorack module version of the classic 4013 CMOS IC. Two independent D-type flip-flops with SET, RESET, CLOCK, and DATA inputs and complementary outputs. On the rising edge of a signal applied to CLK the binary...

  Kassutronics Slope (Wood Panel)   Picture reflctes prototype panel not yet available The Slope module is a voltage controlled slew limiter and modulation source. The core idea behind this module comes form the classic Serge Dual Universal...

From the manufacturer: The Noise Engineering Desmodus Versio is a stereo-in, stereo-out synthetic-tail generator reverb and DSP platform. Desmodus Versio is Noise Engineering’s long anticipated take on a reverb. This is a true stereo in/stereo...

  Joystick replacement for the Transient 7J.

  NLC1127 Stochaos (White NLC) This module generates gates and control voltages based on pink noise or chaos or pink noise vs chaos. You can use a switch to select which variation. It uses a lot of cmos but I was careful to select chips that are...

  Beers 4047 VCO We are delighted to be offering these eurorack modules designed in Australia.  8HP, White Panel Isaac’s original VCO design, slightly cleaned up. This is an otherwise standard analogue triangle-core VCO design with a...

The CGS504 combines 2 functions in to a single module: Preamplifier - for scaling external audio signals to EuroSynth audio levels Envelope Detector - also known as an Envelope Follower and which extract amplitude information from complex audio...

  SSL Soleil Lo-Fi MIDI String Synth Pod The Soleil POD is a tiny low-cost Lo-Fi MIDI String Synth table-top box capable of playing 4 paraphonic notes. The unit includes the MIDI-TRS cable. Inspired by the early vintage string synths...

  PG-13 Passive Gates (S3 Series)   The PG-13 is so easy to build, even a kid could do it! (Adult supervision recommended). PG-13 is a simple, yet endlessly useful, passive dual gate with a tone control.(A pseudo-LPG, sorry no...

  manhattan analog dtm V1.2 DIY PCB Superceded by V1.3 The DTM is a discrete transistor circuit core mixer with 3 inputs and 1 output, based on the vintage Moog CP3. Very similar in features to Manhattan Analog's other mixer, the DTM...

  Radio Music is a virtual radio / sample player module, that behaves a bit like a radio.  A digital way to simulate the radio-powered compositions of John Cage and Karlheinz Stockhausen as well as Don Buchla’s voltage-controlled...

  The MA35 is an internally-coupled VCF and VCA based largely on the back end of the legendary Korg MS-10. The VCF section is based on the classic Korg-35 filter architecture, implemented using discrete transistors rather than the original (and...

Universal drum synthesizer with roots in the analog world on a swappable 10HP oscillator platform Basimilus Iteritas Alia is a parameterized digital drum voice with its roots in the analog world. At its heart, the BIA is a simple six-oscillator additive...

  Custom enclosure for Ray’s Wilson’s Noise Toaster tabletop synth designed by synthCube. This aluminum enclosure features a speaker grill and predrilled holes for the power socket and battery clip. Hardware included. Ready to ship!

  Low-Gain Triangle VCO 4U   The Triangle Core VCO is a straight forward, stable basic VCO with 3 waveform outputs(Triangle, Sine, and Square). Expo/Lin FM Inputs, Sync, PW/PWM, & V/Oct (5-6 octaves). DETAILS Current: TBD ...

  Midi2TRS is a very simple but handy DIY kit. It does 2 things: • it converts the Midi-DIN input to 3,5mm TRS like it’s used now on many synths and controllers nowdays • it switches the polarity on the TRS side and by that flips...