Pedal Kits, PCBs & Mods

Refine Search

Show:
Sort By:

14-piece Set of 4" #22 AWG Jumper Wires, One-pin Male-To-Male

Assortment of 100 mm (4") jumper wires for breadboarding. 2 Each Red, Orange, Yellow, Green, Blue, B..

$1.55 Ex Tax: $1.55

20-piece Set of Long #22 AWG Jumper Wires, One-pin Male-To-Male

Assortment of jumper wires in various colors for breadboarding. Includes: 10 x 6" (150 mm), 5 x 8" (..

$3.40 Ex Tax: $3.40

3W Mono Amplifier K8066

All the parts and the PCB for a small power amp based on the TDA7267A. The assembly instructions and..

$16.95 Ex Tax: $16.95

4-40 Hardware Kit

Everything you usually have to hunt for!Pan-head screws: 1/4" (20), 1/2" (10), 5/8&quo..

$8.95 Ex Tax: $8.95

7W Mono Amplifier Kit K4001

This small amplifier is constructed around the TDA2003 IC, capable of delivering 4Wrms at 4ohms. The..

$15.95 Ex Tax: $15.95

All Pedal Galactavise Compressor Kit

The all-new Galactavise Compressor kit from All-Pedal! First ever SMT KITS! A very complex and rich ..

Priced from
$44.95 to $54.95 Ex Tax: $44.95

All Pedal Slamurai Overdrive Kit

The All New Slamurai Bushido-Drive pedal kit from All-Pedal! First ever SMT KITS! A very comple..

Priced from
$44.95 to $54.95 Ex Tax: $44.95

Analog BBD Delay Clock Module MV-64

The board provides regulated power for the chip from a 9-volt source, connections for tap tempo, pot..

$44.95 Ex Tax: $44.95

CALEX BoM

Colin Alexander Bill of Materials..

$71.62 Ex Tax: $71.62

Ceramic Kit #3 - 50 Volts, 1500 pF. To .01 µF

5 each: 1500 pF, 2200 pF, 2700 pF, 4700 pF 3 each: 3300 pF, 5600 pF, 6800 pF 10 pieces: .01 µF...

$6.95 Ex Tax: $6.95

Cermet Trimpot Kit

25 pieces of 10 popular values: 2 x 500 ohm, 3 x 1K, 2 x 2K, 2 x 5K, 4 x 10K, 2 x 25K, 2 x 50K, 4 x ..

$20.50 Ex Tax: $20.50

Digital Echo Chamber MK182

Based on the Holtek 8972, will give 80 to 200 milliseconds of delay. The assembly instructions are h..

$22.95 Ex Tax: $22.95

Extended Record/Playback Module K8094

Based on the ISD17240PY "answering machine" chip. Offers up to 8 minutes of recording depending on t..

$47.95 Ex Tax: $47.95

Guitar Headphone Amp and Preamp K4102

You get everything needed to build what is shown, including the case. The assembly instructions and ..

$42.95 Ex Tax: $42.95

Jellybean Transistor Kit

10 pieces each: 2N3904, 2N3906, 2N4123, 2N4124, 2N4125, 2N4401, 2N4402, 2N5087, 2N5088, 2N5089 in a ..

$19.95 Ex Tax: $19.95

JFET Kit

A full lineup! 10 pieces each: 2N5457, 2N5458, 2N5484, 2N5485, 2N5952, BF244A, BF245A, Fairchild J20..

$15.95 Ex Tax: $15.95

Kit - The GC Brutalist Jr. (PCB Not Included)

Kurt Ballou of GodCity Studio has created a buildable PCB that is also his business card. ..

Priced from
$28.99 to $43.99 Ex Tax: $43.99

Kit - The GC Baracus V1.5 (PCB Not Included)

The God City Instruments (GCI) Baracus is a medium-gain silicon/germanium hybrid fuzz based on an NP..

Priced from
$26.85 to $43.60 Ex Tax: $26.85

Kit - The GC Bass Brutalist (PCB Not Included)

A new interpretation of the Brutalist Jr. circuit redesigned specifically for bass.  This Bass Bruta..

Priced from
$28.95 to $44.95 Ex Tax: $28.95

Kit - The GC Decker V1.0 (PCB Not Included)

The God City Instruments (GCI) Decker is a simple FMV (Fender Marshall Vox) EQ circuit similar to th..

Priced from
$25.95 to $41.75 Ex Tax: $25.95

Kit - The GC Face V1.4 (PCB Not Included)

The God City Instruments (GCI) Face is a high gain, mid-boosted silicon fuzz inspired by the GCI SBD..

Priced from
$29.50 to $44.95 Ex Tax: $29.50

Kit - The GC Hannibal V1.3 (PCB Not Included)

The God City Instruments (GCI) Hannibal is an overdrive pedal derived from the GCI Riffchild. Experi..

Priced from
$24.95 to $39.95 Ex Tax: $24.95

Kit - The GC Lynch V1.0 (PCB Not Included)

The God City Instruments (GCI) Lynch is an active 3-band, sweepable mid, EQ circuit with which can b..

Priced from
$29.85 to $46.54 Ex Tax: $29.79

Kit - The GC Murdock V1.1 (PCB Not Included)

The God City Instruments (GCI) Murdock is a tone-shaping pedal derived from the EQ section of a Boss..

Priced from
$22.94 to $28.95 Ex Tax: $22.94

Kit - The GC Stockwell V1.1 (PCB Not Included)

The God City Instruments (GCI) Stockwell is an active mid-range EQ circuit. It can be built as a sta..

Priced from
$24.95 to $37.55 Ex Tax: $24.95

Mono Preamp K1803

All the parts and the PCB for a one-stage preamp based on the LM358. The schematic and assembly inst..

$3.95 Ex Tax: $3.95

Moody Sounds BJF Fuzz 109 PCB

The Fuzz 109 by Moody Sounds is a high-gain silicon Fuzz Face with some unusual biasing. For an on-b..

$12.95 Ex Tax: $12.95

MV-58 PedalSync Master Control Development Board

Sends Program Change, Clock, and self-programming commands to other PedalSync devices. Storage for 1..

Price : $54.95 Ex Tax: $54.95

On-Board Kit for BJF Fuzz 109 PCB

On-Board Kit for BJF Fuzz 109 PCB. Kit does not include PCB, available as SKU: 0009X. Includes on-bo..

$10.85 Ex Tax: $10.85

On-board Kit for Tonepad Big Muff Pi

On-board components and potentiometers for the Tonepad Big Muff Pi PCB.  Circuit board sold separate..

Priced from
$12.80 to $13.85 Ex Tax: $13.85

On-board Kit for Tonepad Rebote 2.5 Delay

On-board components and potentiometers for the Tonepad Rebote 2.5 Delay PCB.  Circuit board sold sep..

$19.98 Ex Tax: $19.98

One-Trick Pony Modules

Each module includes firmware that outputs specific MIDI info when the switch is pressed. The kit in..

Price : $22.95 Ex Tax: $22.95

Pad-Per-Hole - Velleman ECS1/2

Epoxy FR-4, 1.6mm, 1.0 oz. flux coated bare copper Single-Side, Pad-Per-Hole, .041" bores 3.9"x3.1"..

$1.99 Ex Tax: $1.99

Pad-Per-Hole, Large - Velleman ECS1-H

Epoxy FR-4, 1.6mm, 1.0 oz. flux coated bare copper Single-Side, Pad-Per-Hole, .041" bores 3.9"x 6.3..

$2.95 Ex Tax: $2.95

PC Board (Economy Version) - The Ursa Minor

A versatile platform for this enhanced Electra-like distortion. It is designed to fit the Bare Box #..

$4.95 Ex Tax: $4.95

PC Board - The Bare Bones Fur Face

This is the PCB for the Fuzz Face build shown on the Stompbox Forum. For beginners, the Bare Box-com..

$8.95 Ex Tax: $8.95

PC Board - The Bear Boost Plus

For those who prefer to create their own kit...

$13.00 Ex Tax: $13.00

PC Board - The Fur Face

No technical support at the price, but an inexpensive and flexible platform for Fuzz Faces or a Fur ..

$4.95 Ex Tax: $4.95

PC Board - The Fuzz E-One

No technical support at the price, but advanced builders can save money by building an FZ-1 or 1A cl..

Priced from
$4.95 to $42.95 Ex Tax: $4.95

PC Board-Making Kit - Positive Photo Process

The kit includes: Two pieces of positive, pre-sensitized FR-4 board, each 3" x 5" One 8 1/2" x 11" ..

$27.95 Ex Tax: $27.95

PC Board-Making Kit - Positive Photo, No Etchant

Same tools and materials for the positive photo process, but no etchant so that I can ship it outsid..

$24.95 Ex Tax: $24.95

PC Board-Making Kit - Press N' Peel

The kit includes: Two pieces of FR-4 blank board, each 3" x 4" One 8 1/2" x 11" sheet of Press N' P..

$24.95 Ex Tax: $24.95

PC Board-Making Kit - Press N' Peel, No Etchant

Same tools and materials for the toner transfer process, but no etchant so that I can ship it outsid..

$21.95 Ex Tax: $21.95

PCB - Electric Druid Flangelicious

A four-knob flanger with digital control and an analog signal path using the 3207 BBD. A PIC with El..

$16.95 Ex Tax: $16.95

PCB - Electric Druid DigiDelay

A digital delay based on Electric Druid firmware. Features: Up to 4 Seconds of delay 12 bit/32KHz i..

$15.95 Ex Tax: $15.95

PCB - Tonepad AMZ Mosfet Booster

Jack Orman's beginner-friendly and very useful MOSFET boost. This board includes R. G. Keen's Millen..

$8.00 Ex Tax: $8.00

PCB - Tonepad Big Muff Pi

Several variants can be built on this board. A parts list for the Green Russian version is in the Li..

$14.00 Ex Tax: $14.00

PCB - Tonepad Blue Clipper

A Dan Armstrong design. The original was a direct plug-in to an amplifier. This board can be mounted..

$11.00 Ex Tax: $11.00

PCB - Tonepad Blues Breaker

A pedal design that simulates the tone of a Marshall amp. You can find a parts list in our Library...

$11.00 Ex Tax: $11.00

PCB - Tonepad Boss CE-2 Chorus

A popular chorus, scarce on the used market. Not a beginner project, but experienced builders can fi..

$17.00 Ex Tax: $17.00

PCB - Tonepad Boss DS-1 Distortion

Intermediate-level build. You can find a parts list for the TL072 version in our Library...

$14.00 Ex Tax: $14.00

PCB - Tonepad DOD 280 Compressor

An intermediate-level build for a great optical compressor. You can find a parts list in our Library..

$11.00 Ex Tax: $11.00

PCB - Tonepad EA Tremolo

Popular tremolo design from a project published in Electronics Australia magazine. You can find a pa..

$11.00 Ex Tax: $11.00

PCB - Tonepad Green Ringer

Good-sounding octave-up suitable for beginner level.You can find a parts list in our L..

$11.00 Ex Tax: $11.00

PCB - Tonepad Maestro Filter, Sample + Hold

Advanced-level build using the 13600 OTA. You can find a parts list in our Library...

$17.00 Ex Tax: $17.00

PCB - Tonepad Marshall Guv'nor

True-bypass version of this distortion with bass/mid/treble tone stack. You can find a parts list in..

$14.00 Ex Tax: $14.00

PCB - Tonepad MAX1044 Bipolar Power

Use this when you need +/9 from a single battery...

$8.00 Ex Tax: $8.00

PCB - Tonepad MXR Blue Box

A "synthy" but very usable octave down. You can find a parts list in our Library...

$14.00 Ex Tax: $14.00

PCB - Tonepad MXR Distortion +

The board accommodates either the Distortion + or the DOD 250. Excellent beginner-level build of a g..

$11.00 Ex Tax: $11.00

PCB - Tonepad MXR Envelope Filter

Very popular wah effect controlled by picking dynamics. You can find a parts list in our Library...

$14.00 Ex Tax: $14.00

PCB - Tonepad MXR MicroAmp

Accommodates either the Microamp, the Distortion + or the DOD 250, uses a 4558 IC. You can find a pa..

$11.00 Ex Tax: $11.00

PCB - Tonepad MXR Phase 45

Intermediate-level build of a subtle, two-stage vintage phase-shifter. Matched JFETs are required to..

$14.00 Ex Tax: $14.00

PCB - Tonepad MXR Phase 90

Advanced-level build of a four-stage phase-shifter. Matched JFETs are required to guarantee good pha..

$14.00 Ex Tax: $14.00

PCB - Tonepad NeoCtavia

Simple but good-sounding octave-up. It's an Octavia done with op-amps instead of discrete transistor..

$11.00 Ex Tax: $11.00

PCB - Tonepad Orange Squeezer

Dan Armstrong's subtle, plug-in compressor, set up to build in a true-bypass stompbox.. You can find..

$11.00 Ex Tax: $11.00

PCB - Tonepad Pedalboard Power Supply

Put this after a 12-volt AC wall wart and have clean power for a bunch of pedals...

$14.00 Ex Tax: $14.00

PCB - Tonepad Rangemaster

Also accommodates the Brian May treble boost...

$9.00 Ex Tax: $9.00

PCB - Tonepad Real McTube

A high-voltage tube preamp for advanced builders only...

$14.00 Ex Tax: $14.00

PCB - Tonepad Rebote 2.5 Delay

Arguably the most popular digital delay project in the DIY community. Please be aware that fakes of ..

$14.00 Ex Tax: $14.00

PCB - Tonepad Rebote 3

Three times the delay (delay time is around 2 seconds), and modulation, endless repeats...

$17.00 Ex Tax: $17.00

PCB - Tonepad Roger Mayer Octavia

A transfomerless version of the Octavia. You can find a parts list in our Library...

$11.00 Ex Tax: $11.00

PCB - Tonepad Ross Compressor

Build either a Ross or a Dynacomp on this board. The CA3080E is still available from stock. A parts ..

$13.00 Ex Tax: $13.00

PCB - Tonepad Ross Phaser

OTA based phaser, very similar to the Small Stone, but using different ICs...

$17.00 Ex Tax: $17.00

PCB - Tonepad Sans Amp GT-2

Cab simulator for advanced DIYers. The DP3T on-on-on toggle switch is our SKU 0229. You can find a f..

$14.00 Ex Tax: $14.00

PCB - Tonepad Small Clone Chorus

Analog chorus based on the MN3007 BBD. Kurt Cobain used it on Nevermind. You can find a parts list i..

$17.00 Ex Tax: $17.00

PCB - Tonepad Small Stone Phaser

This version of the old E-H design is based on the readily-available CA3080 OTA. It sounds as good a..

$17.00 Ex Tax: $17.00

PCB - Tonepad Tone Bender 3-Knob

For the standard, PNP, positive ground circuit. You can find a parts list in our Library..

$11.00 Ex Tax: $11.00

PCB - Tonepad Tremulus Lune

The very versatile trem by Dan Green of Commonsound. You can find a parts list in our Library...

$14.00 Ex Tax: $14.00

PCB - Tonepad Tube Screamer

Tonpad's Tube Screamer (El Griton) PCB. Accommodates the TS-808, TS-9 or the BOSS SD-1. Please see S..

$14.00 Ex Tax: $14.00

PCB - Tonepad Tycho Octavia

The famous transformer/germanium diode-based octave-up. You can find a parts list in our Library...

$11.00 Ex Tax: $11.00

Record/Playback Module MK195

Based on the popular ISD1760PY "answering machine" chip. Offers 30 to 90 seconds of recording depend..

$31.95 Ex Tax: $31.95

Relay Bypass Module Kit MV-57

True bypass switching, controllable by other Pedalsync chips or 3.3V or 5V logic signal. Includes th..

$21.95 Ex Tax: $21.95

Resistor Kits - Carbon Flim 5% 1/8 Watt

An assortment of 1/8 Watt, 5% Carbon Film resistors. Each kit is composed of 12 values in 100 piece ..

Price : $16.95 Ex Tax: $16.95

Semi-Fixed Trimpot Kit

30 pieces of the 10 most popular values in a jewel case: 3 each of 500Ω, 1K, 5K, 10K, 20K, 50K, 100K..

$14.95 Ex Tax: $14.95

Set of #22 AWG Jumper Wires, One-pin Male-To-Male (65 pcs)

Convenient assortment for breadboarding. colors: red - black - white - yellow - green - orange - bl..

$4.50 Ex Tax: $4.50

Signal Generator Mini-Kit MK105

All the parts and the PCB for a signal source based on the 555 timer. The schematic and assembly ins..

$7.95 Ex Tax: $7.95

Sound Generator K4401

Based on a pre-programmed PIC 16F57, generates any of 10 sounds, like machine gun, phaser, sirens, r..

$7.95 Ex Tax: $7.95

Steam Engine Sound Generator MK134

Actually a sophisticated all-analog circuit that incorporates a noise source and filtering to genera..

$3.95 Ex Tax: $3.95

Stripboard - BusBoard #ST-2

Epoxy FR-4, 1.6mm, 1.0 oz. flux coated bare copper Single-Side Stripboard, .037" bores 3.94" x 3.15..

$5.65 Ex Tax: $5.65

Stripboard - Velleman ECL1/2

This Item has been obsoleted by the manufacturer and has been replaced by the BusBoard #ST2 stripboa..

$1.95 Ex Tax: $1.95

Stripboard, Large - Velleman ECL-H

Epoxy FR-4, 1.6mm, 1.0 oz. flux coated bare copper Single-Side, Stripboard, .041" bores 3.9"x 6.3" ..

$2.95 Ex Tax: $2.95

The Bare Box #3 Platform Kit

A complete "environment" that makes it easy to implement your own vision. The 18 gauge ste..

$24.95 Ex Tax: $24.95

The Bear Boost Plus PCB

The same board that comes with the kit. No technical support at the price, but advanced builders can..

$2.00 Ex Tax: $2.00

The Oh My Darling Rangemaster PCB

The board can be configured with jumpers as a straight Rangemaster or either of two D..

$2.50 Ex Tax: $2.50

The Ursa Minor PCB

A versatile platform for this enhanced Electra-like distortion, designed to drop into the Bare Box #..

$2.50 Ex Tax: $2.50

The Wild Mouse PCB

No technical support at the price, but advanced builders can save $$. The documentation is all on-li..

$2.00 Ex Tax: $2.00

Velleman Extradrive Overdrive K8111

A complete kit including everything needed to make the pedal shown here: Drilled case with decal, PC..

$63.95 Ex Tax: $63.95

Velleman Tremor Tremolo K8110

A complete kit including everything needed to make the pedal shown here: Drilled case with decal, PC..

$63.95 Ex Tax: $63.95

LM311 N Type Voltage Comparator

 The LM111-N, LM211-N and LM311-N are voltage The LM211-N is identical to the LM111-N, exce..

$0.99 Ex Tax: $0.99

Open Music Labs Stomp Shield Kit

 synthCube is proud to collaborate with open music labs!The Stomp Shield is a bare-bo..

$79.00 Ex Tax: $79.00

Parasit 8-Bitar Octave Down Pedal

 The 8-Bitar is a minimalistic octave down pedal with a 8-bit sound (glitchy and gated squa..

Price : $8.99 Ex Tax: $8.99

Parasit Darkadiator

 Parasit DarkadiatorThe Darkadiator is a discrete (fully transistor based) glitchy and ..

Priced from
$14.99 to $66.99 Ex Tax: $14.99

Parasit Into the Unknown Guitar Synth Pedal

Into the Unknown is the big brother of the 0415 Guitar Synth. Both are based around a CD4046 PLL (ph..

Price : $85.00 Ex Tax: $16.99

Parasit Multiwave Guitar Synth

 The Multiwave Guitar SynthesizerThe Multiwave Guitar Synth is a guitar controlled osci..

Price : $59.00 Ex Tax: $13.99

Parasit Partial Kits

 Parasit is a small DIY focused pedal company run by designer Fredrik Lyxzén. Freder..

Priced from
$32.00 to $85.00 Ex Tax: $32.00

Parasit Sidescroller Fuzz

 THE SIDESCROLLERThe Sidescroller is another videogame'ish fuzz with octave down, o..

Price : $59.00 Ex Tax: $11.99

Parasit Theremin Fuzz

 THE THEREMIN FUZZThe Theremin Fuzz is a guitar effect that produces a sound similar to..

Price : $18.50 Ex Tax: $11.99

Parasit U-235 Suboctave Generator

The U-235 is an analog monophonic octave down pedal.FeaturesClean signal coming through a..

Price : $18.50 Ex Tax: $11.99

SL1515N 10K 15mm slide pot for SSL Thundrum

For control of volume, tone and balance in audio equipment, as for graphic equalizers and other vari..

$0.99 Ex Tax: $0.99