Sort By:

1/4" Drive Ratchet

If you build/repair a lot of pedals, use this to tighten the hex nut on the stomp switch with less d..

$6.95 Ex Tax: $6.95

18mm Shop Knife

Irwin Tool, handle just over 6" long, with strip of eight snap-off blades. ..

$3.00 Ex Tax: $3.00

2" Deep x 9/16" Socket

For the 1/4"-drive ratchet, when you want an extra-deep socket...

$7.95 Ex Tax: $7.95

9mm Shop Knife

Irwin Tool, handle just under 6" long, comes with 3 strips of thirteen snap-off blades. ..

$2.75 Ex Tax: $2.75

Abrasive Band, 1/2"

Click title for list of available grits ..

Price : $0.25 Ex Tax: $0.00

Abrasive Band, 1/4"

Click title for list of available grits..

Price : $0.20 Ex Tax: $0.20

Adjustable Soldering Station - Velleman 48W

Adjustable Soldering Station. 48W, 320-896 °F (160-480°C). For general electronic construction and r..

$34.95 Ex Tax: $34.95

Adjusting Stripper/Cutter

From Velleman. Not meant for high-volume production, but a super value and convenience for the hobby..

$4.95 Ex Tax: $4.95

Beginner's Tool Set

The set contains: Chain-nose Plier SKU 3001 Side-Cutter SKU 3006 Screwdriver SKU 3202 Straight Pick..

$40.95 Ex Tax: $40.95

Brass Cleaning Sponge

Made of low abrasive brass shavings. Won't damage your soldering tips. Cleaner tip has better heat t..

$6.00 Ex Tax: $6.00


Nylon or steel bristles for cleaning and polishing. The nylon brush can be used alone or with polish..

Price : $2.60 Ex Tax: $2.60

Burr Holder, Lucite

The holes are for 3/32" shanks like in a jeweler's handpiece, but they can easily be drilled larger ..

$7.50 Ex Tax: $7.50

Burr Holder, Wood

Excellent value! Lots of holes, will accept both 3/32" and 1/8" (Dremel) shanks...

$13.95 Ex Tax: $13.95

Burr, Inside Ring, 1/4" Diameter

A kind of rotary file that jewelers use for sizing the inside of a ring. Expensive, but absolutely a..

$15.95 Ex Tax: $15.95

BusBoard - PowerBoard POW3U

Single-sided, 6 hole strips, interleaved power and ground rails. 160 x 100 mm / 6.30 x 3.94 in..

$10.75 Ex Tax: $10.75

BusBoard - ProtoBoard-2H-1

Single-sided, 2 hole strips, 80 x 50mm / 3.15 x 1.97 in..

$3.25 Ex Tax: $3.25

Center Punch

Starrett #117C. Use this to locate a hole, and your drill won't "walk."..

$9.75 Ex Tax: $9.75

Chain-Nose 3000

Good quality lap-joint tool for a beginner at an affordable price. (China)..

$6.00 Ex Tax: $6.00

Chain-Nose 3001

Also a beginner- level tool, box-joint construction for better mechanical stability. (China)..

$7.25 Ex Tax: $7.25

Chain-Nose 3002

Stainless steel, box-joint construction. An affordable professional-quality tool. (Pakistan)..

$11.95 Ex Tax: $11.95

Chain-Nose 3004

Lap-joint construction. Durable, professional-quality. (Germany)..

$15.25 Ex Tax: $15.25