Pedal Kits, PCBs & Mods
Refine Search
14-piece Set of 4" #22 AWG Jumper Wires, One-pin Male-To-Male
Assortment of 100 mm (4") jumper wires for breadboarding. 2 Each Red, Orange, Yellow, Green, Blue, B..
$1.55 Ex Tax: $1.55
20-piece Set of Long #22 AWG Jumper Wires, One-pin Male-To-Male
Assortment of jumper wires in various colors for breadboarding. Includes: 10 x 6" (150 mm), 5 x 8" (..
$3.40 Ex Tax: $3.40
3W Mono Amplifier K8066
All the parts and the PCB for a small power amp based on the TDA7267A. The assembly instructions and..
$16.95 Ex Tax: $16.95
4-40 Hardware Kit
Everything you usually have to hunt for!Pan-head screws: 1/4" (20), 1/2" (10), 5/8&quo..
$8.95 Ex Tax: $8.95
7W Mono Amplifier Kit K4001
This small amplifier is constructed around the TDA2003 IC, capable of delivering 4Wrms at 4ohms. The..
$15.95 Ex Tax: $15.95
All Pedal Galactavise Compressor Kit
The all-new Galactavise Compressor kit from All-Pedal! First ever SMT KITS! A very complex and rich ..
Priced from
$44.95 to $54.95 Ex Tax: $44.95
All Pedal Slamurai Overdrive Kit
The All New Slamurai Bushido-Drive pedal kit from All-Pedal! First ever SMT KITS! A very comple..
Priced from
$44.95 to $54.95 Ex Tax: $44.95
Analog BBD Delay Clock Module MV-64
The board provides regulated power for the chip from a 9-volt source, connections for tap tempo, pot..
$44.95 Ex Tax: $44.95
Ceramic Kit #3 - 50 Volts, 1500 pF. To .01 µF
5 each: 1500 pF, 2200 pF, 2700 pF, 4700 pF 3 each: 3300 pF, 5600 pF, 6800 pF 10 pieces: .01 µF...
$6.95 Ex Tax: $6.95
Cermet Trimpot Kit
25 pieces of 10 popular values: 2 x 500 ohm, 3 x 1K, 2 x 2K, 2 x 5K, 4 x 10K, 2 x 25K, 2 x 50K, 4 x ..
$20.50 Ex Tax: $20.50
Digital Echo Chamber MK182
Based on the Holtek 8972, will give 80 to 200 milliseconds of delay. The assembly instructions are h..
$22.95 Ex Tax: $22.95
Extended Record/Playback Module K8094
Based on the ISD17240PY "answering machine" chip. Offers up to 8 minutes of recording depending on t..
$47.95 Ex Tax: $47.95
Guitar Headphone Amp and Preamp K4102
You get everything needed to build what is shown, including the case. The assembly instructions and ..
$42.95 Ex Tax: $42.95
Jellybean Transistor Kit
10 pieces each: 2N3904, 2N3906, 2N4123, 2N4124, 2N4125, 2N4401, 2N4402, 2N5087, 2N5088, 2N5089 in a ..
$19.95 Ex Tax: $19.95
JFET Kit
A full lineup! 10 pieces each: 2N5457, 2N5458, 2N5484, 2N5485, 2N5952, BF244A, BF245A, Fairchild J20..
$15.95 Ex Tax: $15.95
Kit - The GC Brutalist Jr. (PCB Not Included)
Kurt Ballou of GodCity Studio has created a buildable PCB that is also his business card. ..
Priced from
$28.99 to $43.99 Ex Tax: $43.99
Kit - The GC Baracus V1.5 (PCB Not Included)
The God City Instruments (GCI) Baracus is a medium-gain silicon/germanium hybrid fuzz based on an NP..
Priced from
$26.85 to $43.60 Ex Tax: $26.85
Kit - The GC Bass Brutalist (PCB Not Included)
A new interpretation of the Brutalist Jr. circuit redesigned specifically for bass. This Bass Bruta..
Priced from
$28.95 to $44.95 Ex Tax: $28.95
Kit - The GC Decker V1.0 (PCB Not Included)
The God City Instruments (GCI) Decker is a simple FMV (Fender Marshall Vox) EQ circuit similar to th..
Priced from
$25.95 to $41.75 Ex Tax: $25.95
Kit - The GC Face V1.4 (PCB Not Included)
The God City Instruments (GCI) Face is a high gain, mid-boosted silicon fuzz inspired by the GCI SBD..
Priced from
$29.50 to $44.95 Ex Tax: $29.50
Kit - The GC Hannibal V1.3 (PCB Not Included)
The God City Instruments (GCI) Hannibal is an overdrive pedal derived from the GCI Riffchild. Experi..
Priced from
$24.95 to $39.95 Ex Tax: $24.95
Kit - The GC Lynch V1.0 (PCB Not Included)
The God City Instruments (GCI) Lynch is an active 3-band, sweepable mid, EQ circuit with which can b..
Priced from
$29.85 to $46.54 Ex Tax: $29.79
Kit - The GC Murdock V1.1 (PCB Not Included)
The God City Instruments (GCI) Murdock is a tone-shaping pedal derived from the EQ section of a Boss..
Priced from
$22.94 to $28.95 Ex Tax: $22.94
Kit - The GC Stockwell V1.1 (PCB Not Included)
The God City Instruments (GCI) Stockwell is an active mid-range EQ circuit. It can be built as a sta..
Priced from
$24.95 to $37.55 Ex Tax: $24.95
Mono Preamp K1803
All the parts and the PCB for a one-stage preamp based on the LM358. The schematic and assembly inst..
$3.95 Ex Tax: $3.95
Moody Sounds BJF Fuzz 109 PCB
The Fuzz 109 by Moody Sounds is a high-gain silicon Fuzz Face with some unusual biasing. For an on-b..
$12.95 Ex Tax: $12.95
MV-58 PedalSync Master Control Development Board
Sends Program Change, Clock, and self-programming commands to other PedalSync devices. Storage for 1..
Price : $54.95 Ex Tax: $54.95
On-Board Kit for BJF Fuzz 109 PCB
On-Board Kit for BJF Fuzz 109 PCB. Kit does not include PCB, available as SKU: 0009X. Includes on-bo..
$10.85 Ex Tax: $10.85
On-board Kit for Tonepad Big Muff Pi
On-board components and potentiometers for the Tonepad Big Muff Pi PCB. Circuit board sold separate..
Priced from
$12.80 to $13.85 Ex Tax: $13.85
On-board Kit for Tonepad Rebote 2.5 Delay
On-board components and potentiometers for the Tonepad Rebote 2.5 Delay PCB. Circuit board sold sep..
$19.98 Ex Tax: $19.98
One-Trick Pony Modules
Each module includes firmware that outputs specific MIDI info when the switch is pressed. The kit in..
Price : $22.95 Ex Tax: $22.95
Pad-Per-Hole - Velleman ECS1/2
Epoxy FR-4, 1.6mm, 1.0 oz. flux coated bare copper Single-Side, Pad-Per-Hole, .041" bores 3.9"x3.1"..
$1.99 Ex Tax: $1.99
Pad-Per-Hole, Large - Velleman ECS1-H
Epoxy FR-4, 1.6mm, 1.0 oz. flux coated bare copper Single-Side, Pad-Per-Hole, .041" bores 3.9"x 6.3..
$2.95 Ex Tax: $2.95
PC Board (Economy Version) - The Ursa Minor
A versatile platform for this enhanced Electra-like distortion. It is designed to fit the Bare Box #..
$4.95 Ex Tax: $4.95
PC Board - The Bare Bones Fur Face
This is the PCB for the Fuzz Face build shown on the Stompbox Forum. For beginners, the Bare Box-com..
$8.95 Ex Tax: $8.95
PC Board - The Fur Face
No technical support at the price, but an inexpensive and flexible platform for Fuzz Faces or a Fur ..
$4.95 Ex Tax: $4.95
PC Board - The Fuzz E-One
No technical support at the price, but advanced builders can save money by building an FZ-1 or 1A cl..
Priced from
$4.95 to $42.95 Ex Tax: $4.95
PC Board-Making Kit - Positive Photo Process
The kit includes: Two pieces of positive, pre-sensitized FR-4 board, each 3" x 5" One 8 1/2" x 11" ..
$27.95 Ex Tax: $27.95
PC Board-Making Kit - Positive Photo, No Etchant
Same tools and materials for the positive photo process, but no etchant so that I can ship it outsid..
$24.95 Ex Tax: $24.95
PC Board-Making Kit - Press N' Peel
The kit includes: Two pieces of FR-4 blank board, each 3" x 4" One 8 1/2" x 11" sheet of Press N' P..
$24.95 Ex Tax: $24.95
PC Board-Making Kit - Press N' Peel, No Etchant
Same tools and materials for the toner transfer process, but no etchant so that I can ship it outsid..
$21.95 Ex Tax: $21.95
PCB - Electric Druid Flangelicious
A four-knob flanger with digital control and an analog signal path using the 3207 BBD. A PIC with El..
$16.95 Ex Tax: $16.95
PCB - Electric Druid DigiDelay
A digital delay based on Electric Druid firmware. Features: Up to 4 Seconds of delay 12 bit/32KHz i..
$15.95 Ex Tax: $15.95
PCB - Tonepad AMZ Mosfet Booster
Jack Orman's beginner-friendly and very useful MOSFET boost. This board includes R. G. Keen's Millen..
$8.00 Ex Tax: $8.00
PCB - Tonepad Big Muff Pi
Several variants can be built on this board. A parts list for the Green Russian version is in the Li..
$14.00 Ex Tax: $14.00
PCB - Tonepad Blue Clipper
A Dan Armstrong design. The original was a direct plug-in to an amplifier. This board can be mounted..
$11.00 Ex Tax: $11.00