Tools & Supplies
Refine Search
1/4" Drive Ratchet
If you build/repair a lot of pedals, use this to tighten the hex nut on the stomp switch with less d..
$6.95 Ex Tax: $6.95
1/4" Drive Ratchet with 9/16" Socket
If you build/repair a lot of pedals, use this to tighten the hex nut on the stomp switch with less d..
$26.95 Ex Tax: $26.95
16-Drawer Organizer
Akro-Mils #10716. Top quality, rugged and stackable! Very convenient for desktop or workbench! ..
$7.95 Ex Tax: $7.95
18mm Shop Knife
Irwin Tool, handle just over 6" long, with strip of eight snap-off blades. ..
$3.00 Ex Tax: $3.00
2" Deep Sockets
For the 1/4"-drive ratchet, when you want an extra-deep socket. Click for options. ..
Priced from
$1.25 to $1.60 Ex Tax: $1.25
2" Deep x 9/16" Socket
For the 1/4"-drive ratchet, when you want an extra-deep socket. ..
$7.95 Ex Tax: $7.95
20-Drawer Organizer
Includes 20 removable dividers that can be placed anywhere along the ridges within each drawer. Orga..
$16.95 Ex Tax: $16.95
3M Scotch-Brite 4.5" x 6"
4.5" x 6" pad for less than you'll pay in the hardware store. 3M, not a knock-off...
$0.79 Ex Tax: $0.79
6 Compartment Storage
Plano #3450, Apx. 8 1/4" x 4 1/4" x 1 1/8", Fixed dividers ..
$2.95 Ex Tax: $2.95
7/8" x 12" Dowel
If you are making your own wire storage, this material fits the I.D. of our standard spools. ..
$0.99 Ex Tax: $0.99
9mm Shop Knife
Irwin Tool, handle just under 6" long, comes with 3 strips of thirteen snap-off blades. ..
$2.75 Ex Tax: $2.75
Adjustable Soldering Station - Velleman 48W
Adjustable Soldering Station. 48W, 320-896 °F (160-480°C). For general electronic ..
$34.95 Ex Tax: $34.95
Adjusting Stripper/Cutter
These wire strippers/wire cutters from Velleman are a super valuable and convenient tool f..
$4.95 Ex Tax: $4.95
Anti-Static Bags, Open Top, 3" x 5"
Anti-Static Bags: 3" x 5" Click link for bulk pricing..
$0.15 Ex Tax: $0.15
Anti-Static Bags, Open Top, 4" x 6"
Anti-Static Bags: 4" x 6" Click link for bulk pricing Please see SKU:6009 for size "3X5"..
$0.20 Ex Tax: $0.20
Anti-Static Foam For ICs
Protektive Pak #37681, 1/4" thick. Please click the drop-down to order as 2" x 2..
Priced from
$0.49 to $0.69 Ex Tax: $0.00
Bag, Bubble, For Pedals - "BB" Size
7" x 9" with a 1" self-seal flap. Good fit for either corrugated box; click the item title for a pic..
$0.55 Ex Tax: $0.55
Beginner Tool Set
Everybody needs to start somewhere – and that phrase absolutely applies to elec..
$40.95 Ex Tax: $40.95
Box, Corrugated, For "1790NS" Plus+
Same style as the 125-B and "BB" corrugated packaging box (SKU 6001) but 7.25" X 7.5" x 3.5". Made t..
$1.25 Ex Tax: $1.25
Box, Corrugated, For "BB" & "125-B" Pedals
Protect that finish that you worked So hard on! Fits both "BB" and "125-B" sizes; leaves room for a ..
$1.00 Ex Tax: $1.00
Box, Corrugated, For "BB" Pedals
Protect that finish that you worked So hard on! 6" x 4" x 2 1/2", leaves room for a protective bag a..
$1.00 Ex Tax: $1.00
Box, Storage, Large
10.7" x 6.9" x 1.6", hinged cover, comes with 15 adjustable dividersFinal sale ..
$4.95 $1.99 Ex Tax: $1.99
Brass Cleaning Sponge
Made of low abrasive brass shavings. This sponge won't damage your soldering tips. A c..
$6.00 Ex Tax: $6.00
Brushes
Nylon or steel bristles for cleaning and polishing. The nylon brush can be used alone or w..
Price : $2.60 Ex Tax: $2.60
Burr, Inside Ring, 1/4" Diameter
A kind of rotary file that jewelers use for sizing the inside of a ring. Expensive, but absolutely a..
$15.95 Ex Tax: $15.95
Center Punch
Use this to locate a hole, and your drill won't "walk."Starrett #117C ..
$9.75 Ex Tax: $9.75
Chain-Nose 3000
Good quality lap-joint tool for a beginner at an affordable price. (China) ..
$6.00 Ex Tax: $6.00
Chain-Nose 3001
Also a beginner- level tool, box-joint construction for better mechanical stability. (China) ..
$7.25 Ex Tax: $7.25
Chain-Nose 3002
Stainless steel, box-joint construction. An affordable professional-quality tool. (Pakista..
$11.95 Ex Tax: $11.95
Chain-Nose 3004
Lap-joint construction. Durable, professional-quality. (Germany) ..
$15.25 Ex Tax: $15.25
Chain-Nose 3005
Box-joint construction, professional-quality. I use these.(Germany) ..
$21.50 Ex Tax: $21.50
Circle and Straight-Edge Cutter #678-01
Use with the cutting bit #561 to cut precise circles in sheet materials. Click the title for a pic. ..
$8.95 Ex Tax: $8.95
Circuit Board Clamping Kit
Inexpensive, flexible and stable jig for holding a board up to 7.87 x 5.51 in., rotates 36..
$12.75 Ex Tax: $12.75
Clear Storage Box
A "jewel case" for small parts and hardware. 4 11/16" x 3 5/8" x 7/8" with ..
$1.25 Ex Tax: $1.25
Corrugated For 1590G, "B" & "125-B" Pedals
Protect that finish that you worked SO hard on! Fits a 1590G, "B" and "125-B" size enclosure! Also f..
$0.95 Ex Tax: $0.95
Corrugated, For "1790NS"
Corrugated packaging box. Will fit a 1790NS or a kit bundle. Inner dimensions: 7.25" x 5" x 3". ..
$1.15 Ex Tax: $1.15
Dedeco Large Cutoff Wheels
Aluminum Oxide, click title for available sizes. WEAR GOGGLES WHEN USING THESE! ..
Price : $0.65 Ex Tax: $0.65
Digital Multimeter - Basic
3 1/2 digits, 1" high display 10 Meg Input Impedance DC Volts 200 mv. to 1000 ..
$8.95 Ex Tax: $8.95
Digital Multimeter - Full Featured
3 1/2 digits, 1.5" high display with LED back-light 10 Meg Input Impedance DC ..
$25.95 Ex Tax: $25.95
Digital Multimeter - Intermediate
3 1/2 digits, 1.5" high display with back-light 10 Meg Input Impedance DC Volt..
$16.95 Ex Tax: $16.95
Dremel 3000-1/24 Rotary Tool
Variable Speed Rotary Tool Kit with a range of 5,000 to 35,000 RPM 6 Variable Speeds ..
$49.99 Ex Tax: $49.99
Dremel Collets
You will want all four to handle a variety of tools. Click for the list. ..
Price : $0.95 Ex Tax: $0.95
Dremel Cutoff Wheels
1 1/4" diameter, ideal for cutting circuit boards to size, slotting metal. #426 is fiberg..
Priced from
$0.85 to $1.55 Ex Tax: $1.55
Dremel Mandrels
#401 is for felts. #402 is the standard 1/8" shank holder for cutoff wheels. ..
Price : $1.50 Ex Tax: $1.50
Dremel Sanding-Grinding Attachment A576
Provides an edge guide when working by hand, or a platform when the tool is supported on a workstati..
$4.95 Ex Tax: $4.95
Dremel Workstation
Converts the handpiece to a drill press, and it can rotate. ..
$45.95 Ex Tax: $45.95
Dressing Stone
Dremel # 415. Extends the life of grinding stones by removing clogged material. ..
$1.50 Ex Tax: $1.50
Drill - Unibit #1
By Irwin Tool. Drills any size hole from 1/8" to 1/2" in increments of 1/32"..
$9.95 Ex Tax: $9.95
Drills - 3/32" Shank
Swiss made, fit Dremel #481 collet OR Jacobs chuck on a 1/4" drill or drill press. Click the it..
Price : $2.75 Ex Tax: $2.75
Drills - Wire Number for PC Boards
High Speed Steel. Sizes from #53 (.059) through #70 (.028). Click the title for a list of ..
Price : $0.90 Ex Tax: $0.90
Energizer Clip Light
Clever Product! Clip it on where you need a little more light: Book, Music Stand, Chassis...
$2.95 Ex Tax: $2.95
Five-Pot Bracket
Make your own IdeaBox or IdeaBoard! A bracket of .062" aluminum, sized to fit a New S..
$2.45 Ex Tax: $2.45
Graduated Measuring Cups
For precise measuring of paints, resins, epoxy. 1 oz., calibrated in fractions of an ounce and milli..
$2.00 Ex Tax: $2.00
High-Speed Steel Cutting Burrs
For hollowing, cutting grooves, slots and openings in plastic or soft metal. Click the title for a l..
Price : $4.50 Ex Tax: $4.50
IC Extraction Tool
Remove ICs without damaging or bending pins and works as standard tweezers to extract DIP ..
$1.95 Ex Tax: $1.95
Ice Cream Sticks
Standard 4 1/2" x 3/8" size is perfect for mixing epoxy or paints. Bag of 100..
$2.50 Ex Tax: $2.50
J-B Weld Kwik Epoxy
Steel-filled, quick-setting, gray. Excellent for attaching studs. ..
$6.75 Ex Tax: $6.75
Key File Set
German-made, six 4-inch files with handles: flat, half-round, round, square, triangle and ..
$5.95 Ex Tax: $5.95
Key Files - Individual
You can order individual files if you don't need the whole set. Click the title for th..
Price : $1.00 Ex Tax: $1.00
Lighted Magnifier
4 X magnification, 2 1/2" diameter glass lens. Lamp powered by two AA batteries (not ..
$2.50 Ex Tax: $2.50
Lucite Base For Idea Board
3/16" thick and pre-cut to 6 1/2" x 9".Make your own customized Idea Bo..
$6.95 Ex Tax: $6.95
Lucite Burr Holder
The holes are for 3/32" shanks like in a jeweler's handpiece, but they can easily be drille..
$7.50 Ex Tax: $7.50
Mandrel, 1/4" Arbor
Euro Tool BRS414.00 For abrasive bands, Shank fits Dremel 1/8" collet #480 ..
$2.25 Ex Tax: $2.25
Mini Side-cutter 3006A
Slightly smaller at 4-1/4 inches, this would be well-suited for the ladies, or the younger..
$7.50 Ex Tax: $7.50
Multi-purpose Cutting Bit - Dremel # 561
1/8" shank, for cutting drywall and other sheet materials. ..
$1.95 Ex Tax: $1.95
Needle File Handle
Has a collet that holds a file securely in the knurled handle. Unscrews easily to change t..
$9.75 Ex Tax: $9.75
Needle File Set - Cut #2
6 Files, Swiss Pattern, Cut #2, 5 1/2" length, includes Round, Square, Half-Round, Three-Square..
$7.75 Ex Tax: $7.75
Nibbling Tool
The work goes where the arrow points. When you squeeze, the punch progressively chews a ch..
$34.95 Ex Tax: $34.95
Nicholson Files - Flat, Bastard Cut
Still the gold standard. Expensive, but worth it. ..
Price : $7.50 Ex Tax: $0.00
Peak Atlas Semiconductor Component Analyzer
Very handy and convenient instrument for identifying and testing a wide variety of devices..
$76.95 Ex Tax: $76.95
Plier Holder
Three positions, varnished wood. Takes up minimum space on the bench. ..
Price : $2.50 Ex Tax: $2.50
Plier Holder 3101
Euro Tool HOL315.04. As above, but with four positions ..
Price : $2.95 Ex Tax: $2.95
Plier Rack
Lucite, 10 1/2" long. Small footprint, lots of room on top for pliers, holes pre-dril..
Price : $4.95 Ex Tax: $4.95
Polishing and Grinding Wheels
#425 is emery-impregnated for fine polishing. #541 is aluminum oxide for coarse grinding. ..
Price : $2.99 Ex Tax: $2.99
Polishing Compound
Use this with a nylon brush or felt buffer to produce a shiny finish on metal. ..
$2.50 Ex Tax: $2.50
Polishing Compound, Small
Sample size of Dremel # 421. Use this with a nylon brush or felt buffer to produce a shiny..
$1.25 Ex Tax: $1.25
Scoring Tool for Vero and Stripboard
Turn the point in a hole and it will break the trace cleanly. ..
$6.05 Ex Tax: $6.05
Side-cutter 3008
Stainless, box-joint construction, complement to the 260.00 above. (Pakistan) ..
$12.75 Ex Tax: $12.75
Side-cutter 3009
Lap-joint construction. Complement to the 400.00 above. (Germany) ..
$3.95 Ex Tax: $3.95
Side-cutter 3010
Box-joint construction, professional-quality, complement of the PLR100.00. I use these. (G..
$27.50 Ex Tax: $27.50
Solder 60/40 Tin/Lead - 10 ft
.040" diameter, 10 ft., by AIM Solder www.aimsolder.com ..
$2.25 Ex Tax: $2.25
Solder 60/40 Tin/Lead - Spool
.040" diameter, 1 lb. spool by Aim Solder. www.aimsolder.com ..
$25.95 Ex Tax: $25.95
Solder 63/37 Tin/Lead - 10 ft
.040" diameter, 10 ft. by Aim Solder. www.aimsolder.com ..
$1.95 Ex Tax: $1.95
Solder 63/37 Tin/Lead - Spool
.040" diameter, 1 lb. spool by Aim Solder. www.aimsolder.com ..
$22.95 Ex Tax: $22.95
Soldering Iron Stand
Spring-type holder for Weller irons, with cellulose sponge. ..
$8.25 Ex Tax: $8.25
Soldering Iron Stand - Xytronic 105A
Stand only, with metal cleaning sponge ..
Price : $10.95 Ex Tax: $10.95
Soldering Iron Tip Weller ETS .01" Conical
For Irons EC1201A and 1204A/PES50, 51/WCC101 ..
$6.75 Ex Tax: $6.75
Soldering Iron Weller WP-25
Good quality 25-watt tool, reasonably priced, and the tips don't corrode after a few u..
$42.95 Ex Tax: $42.95
Soldering Station - Velleman 48W
Adjustable Soldering Station. 48W, 302 - 842 °F (150-450°C). For general electroni..
$31.95 Ex Tax: $31.95
Soldering Station - Weller WLC100
Good-quality iron takes ST series tips. Continuously variable temp controller built into s..
Price : $61.95 Ex Tax: $61.95
Soldering Station - Xytronic 169D
Precision temp control with digital readout, iron comes with 1.6mm screwdriver tip (Xytron..
Price : $103.95 Ex Tax: $103.95
Soldering Station - Xytronic LF-389D
60 Watt, Precision temp control with digital readout, 302 to 896F. Iron comes with 1.6mm pencil..
$29.95 Ex Tax: $29.95
Step Drill Bit - 1/8" to 1/2"
High-quality, imported clone of the Irwin Tool Unibit. Titanium Nitride coating. ..
$12.95 Ex Tax: $12.95
Tapmatic #2 Cutting Fluid - 1 Pint
Useful stuff! A few drops make drilling much faster, and tools last longer! Must ship Fede..
$13.50 Ex Tax: $13.50
Tapmatic #2 Cutting Fluid - 2 Ounces
This will last most DIYers, a long time. Includes the instructions and a dispensing cap. M..
Price : $4.00 Ex Tax: $4.00
Third Hand
Convenient, versatile and inexpensive way to hold your work steady while you solder! The h..
$4.95 Ex Tax: $4.95
Tool Rack Kit
I created this out of necessity. I took the Lucite rack and routed some of the holes large..
$4.95 Ex Tax: $4.95
Twist Drill Set - 1/16" to 1/4" by 64ths
Irwin Tool/Hanson, High-speed steel, bright finish, 13 pieces. ..
Price : $13.50 Ex Tax: $13.50
Twist Drills - 13/64", 7/32"
Hanson/Irwin Tool, high-speed steel, bright finish. Click to choose size. ..
$1.65 Ex Tax: $1.65
Twist Drills - 3/64" to 7/64"
Hanson/Irwin Tool, high-speed steel, bright finish, straight shank. Click for list of size..
Price : $0.90 Ex Tax: $0.90
Twist Drills - 9/64" to 11/64"
Hanson/Irwin Tool, high-speed steel, bright finish. Click for list of sizes. ..
$1.20 Ex Tax: $1.20
Twist Drills, Wire Number - Tungsten Carbide
Re-sharpened, 3/32" shank. Colored collars for easy handling and ID. ..
Price : $1.89 Ex Tax: $1.89
Wheel, Abrasive Cutoff, 7/8"
Euro Tool ABR196.00 Similar to Dremel #409. Fits either BRS275.00 or 285.00.YOU MUST W..
$0.15 Ex Tax: $0.15
Wire Bending Jigs
If you stuff a fair number of boards but not enough to justify automation, you need one or..
Price : $4.95 Ex Tax: $4.95
Wooden Burr Holder
Excellent value! Lots of holes, will accept both 3/32" and 1/8" (Dremel) shanks...
$13.95 Ex Tax: $13.95
Xcelite PS120 Nut Driver Set
Opening Size: 3/32 in, 1/8 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 9/32 in, 5/16 in, 11/..
$21.95 Ex Tax: $21.95
3.5mm Jack Round Nut Driver Tool
courtesy of roman sowa, precision custom-made nut drivers compatible with the eurorack 3.5..
$18.00 Ex Tax: $18.00
B-STOCK Empty IC Tubes
empty IC tubesorganize your shop or benchwe have a surplus of these plastic IC tub..
$1.89 Ex Tax: $1.89
Chisel Solder Tips
Chisel Solder Tip – 1.6mm & 2.4mmReplacement 2.4mm Chisel Tip for the f..
Price : $6.99 Ex Tax: $6.99
Circuit Specialists Station-60
The Station-60 is a quality digital soldering station from Circuit Specialists.We use this ..
$55.00 Ex Tax: $55.00
DIY starter kit
Curious about DIY synths but not sure where to start? Our DIY starter kit will get yo..
Priced from
$150.00 to $200.00 Ex Tax: $150.00
Driver for Knurled Round Nuts
avoid scratching your panels by using the wrong tool to tighten round knurled nutsthis..
$9.99 Ex Tax: $9.99
Open Music Labs Audio Sniffer Kit
Open Music Labs Audio Sniffer Kit So, you can’t afford an oscilloscope,..
$24.99 Ex Tax: $24.99
-800x800.jpg "smt diy starter toolkit")
smt diy starter toolkit
smt diy starter toolkita few selected tools to help start your efforts in smt diy- the toolkit inclu..
$25.99 Ex Tax: $25.99
Solder Practice Kit
KIT PARTS LISTRESISTORSQty. Symbol Value Color Code Part #2 R1, R7 100Ω ..
$12.99 Ex Tax: $12.99