Circuit Abbey Tripfire

circuit abbey tripfire

PCB+Panel+IC set includes the panel, main and LED PCBs, and programmed PIC

The Trip/Fire is a very handy dual utility Euro Rack module in 
4HP. The top half is a full featured comparator, and the 
bottom module is a multi-mode trigger/gate delay. It is great 
for creating new rhythms, triggering envelopes, and all 
kinds of modular experiments!

The comparator uses a reference level to compare against 
the input. If the input is higher than the reference then the 
output goes high. The reference source is an external input 
passed through an attenuverter. If no source is plugged into 
the REF input an internal source is used.

The output of the comparator is normaled to the input of the 
Gate/Trigger delay, meaning that any gates derived from the 
comparator pass down to the trigger/gate delay unless 
another source is plugged into the trigger/gate delay input.

The delay section is an event/edge recorder with one trigger 
delay mode and 2 gate delay modes. Trigger delay senses 
trigger inputs and delays them before sending to the output. 
The first gate mode outputs a delayed gate open input but 
outputs a gate close without delay. The other gate mode 
delays both the gate open and gate closed input. The delay 
range is about 1 second and jumper settable to about 8 
seconds.

This 4HP module has a maximum 40mA current draw

On Demand Info

These kits and assembled modules are offered on demand, click the link to learn more.