Nonlinearcircuits (NLC)
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1086 Digital Filter Simulator (White Magpie)
NLC1086 Digital Filter Simulator (White Magpie Version) This module is based ..
Priced from
$22.00 to $265.00 Ex Tax: $22.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1086 Digital Filter Simulator (White NLC)
NLC1086 Digital Filter Simulator (White NLC Version) This module is based on ..
Priced from
$22.00 to $259.00 Ex Tax: $22.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1087 Dual LPG (Black Magpie)
NLC1087 Dual LPG (Black Magpie Version) This is a pretty standard lo-pass gat..
Priced from
$24.00 to $225.00 Ex Tax: $24.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1087 Dual LPG (White Magpie)
NLC1087 Dual LPG (White Magpie Version) This is a pretty standard lo-pass gat..
Priced from
$24.00 to $225.00 Ex Tax: $24.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1087 Dual LPG (White NLC)
NLC1087 Dual LPG (White NLC Version) This is a pretty standard lo-pass gate, ..
Priced from
$22.00 to $219.00 Ex Tax: $22.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1088 Mogue Mixer/VCA (Black Magpie)
NLC1088 Mogue Mixer/VCA (Black Magpie Version) MOGUE is a VCA and Mixer inspi..
Priced from
$20.00 to $215.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1088 Mogue Mixer/VCA (White Magpie)
NLC1088 Mogue Mixer/VCA (White Magpie Version) MOGUE is a VCA and Mixer inspi..
Priced from
$20.00 to $215.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1088 Mogue Mixer/VCA (White NLC)
NLC1088 Mogue Mixer/VCA (White NLC Version) MOGUE is a VCA and Mixer inspired..
Priced from
$20.00 to $209.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1089 Mixer (Black Magpie)
NLC1089 Mixer (Black Magpie Version) Simple and super useful mixer and line l..
Priced from
$20.00 to $165.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1089 Mixer (White Magpie)
NLC1089 Mixer (White Magpie Version) Simple and super useful mixer and line l..
Priced from
$20.00 to $165.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1089 Mixer (White NLC)
NLC1089 Mixer (White NLC Version) Simple and super useful mixer and line leve..
Priced from
$20.00 to $159.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1090 Dispersion Delay (Black Magpie)
The NLC Dispersion Delay is three vactrol based bandpass filters in parallel, with each fi..
Priced from
$25.00 to $299.00 Ex Tax: $25.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1090 Dispersion Delay (White Magpie)
The NLC Dispersion Delay is three vactrol based bandpass filters in parallel, with each fi..
Priced from
$25.00 to $299.00 Ex Tax: $25.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1090 Dispersion Delay (White NLC)
The NLC Dispersion Delay is three vactrol based bandpass filters in parallel, with each fi..
Priced from
$25.00 to $289.00 Ex Tax: $25.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1091 Mobius PiLL (Black Magpie)
The NLC Mobius PiLL is a chaotic noise module. There are several papers des..
Priced from
$22.00 to $219.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1091 Mobius PiLL (White Magpie)
The NLC Mobius PiLL is a chaotic noise module. There are several papers des..
Priced from
$22.00 to $219.00 Ex Tax: $20.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1092 Delay No More 3 (Black Magpie)
NLC1092 Delay No More 3 (Black Magpie Version) This module contains three PT2..
Priced from
$22.00 to $279.00 Ex Tax: $22.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1092 Delay No More 3 (Black NLC)
NLC1092 Delay No More 3 (Black NLC Version) This module contains three P..
Priced from
$22.00 to $269.00 Ex Tax: $22.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1092 Delay No More 3 (White Magpie)
NLC1092 Delay No More 3 (White Magpie Version) This module contains three PT2..
Priced from
$22.00 to $279.00 Ex Tax: $22.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1092 Delay No More 3 (White NLC)
NLC1092 Delay No More 3 (White NLC Version) This module contains three PT2399..
Priced from
$22.00 to $269.00 Ex Tax: $22.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1094 Neuron Diff Rectifier (C68 Version)
NLC1094 Neuron Diff Rectifier (C68 Version) 8hp Eurorack format. Aluminium pa..
Priced from
$9.00 to $69.00 Ex Tax: $9.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1095 Dual Neuron Diff Rectifier
NLC1095 Dual Neuron Diff Rectifier (C68 Version)16hp Eurorack format. Aluminum euro pa..
Priced from
$24.00 to $189.00 Ex Tax: $28.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1096 Dual Neuron Diff Rectifier (Black Magpie)
NLC1096 Dual Neuron Diff Rectifier (Black Magpie Version) Full kit to build t..
Priced from
$15.00 to $66.00 Ex Tax: $0.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1096 Dual Neuron Diff Rectifier (White Magpie)
NLC1096 Dual Neuron Diff Rectifier (White Magpie Version) Full kit to build t..
Priced from
$30.00 to $125.00 Ex Tax: $30.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.
NLC1096 Neuron Diff Rectifier (Black Magpie)
NLC1096 Neuron Diff Rectifier (Black Magpie Version) Full kit to build the An..
Priced from
$15.00 to $79.00 Ex Tax: $15.00
Andrew (NLC founder) started building DIY synths in 1998. Mainly built CGS and Serge clone designs from Ken Stone, along with various tube synths.
Andrew studied Electronics and completed a Diploma of Electrotechnology, then an Electronic Engineering degree and then a PhD on memristor based chaotic circuits at the University of Western Australia.