Tools
1/4" Drive Ratchet
If you build/repair a lot of pedals, use this to tighten the hex nut on the stomp switch with less d..
$6.95 Ex Tax: $6.95
1/4" Drive Ratchet with 9/16" Socket
If you build/repair a lot of pedals, use this to tighten the hex nut on the stomp switch with less d..
$26.95 Ex Tax: $26.95
18mm Shop Knife
Irwin Tool, handle just over 6" long, with strip of eight snap-off blades. ..
$5.99 Ex Tax: $5.99
2" Deep Sockets
For the 1/4"-drive ratchet, when you want an extra-deep socket. Click for options. ..
Priced from
$1.25 to $1.60 Ex Tax: $1.25
2" Deep x 9/16" Socket
For the 1/4"-drive ratchet, when you want an extra-deep socket. ..
$7.95 Ex Tax: $7.95
9mm Shop Knife
Irwin Tool, handle just under 6" long, comes with 3 strips of thirteen snap-off blades. ..
$4.99 Ex Tax: $4.99
Adjustable Soldering Station - Velleman 48W
Adjustable Soldering Station. 48W, 320-896 °F (160-480°C). For general electronic ..
$34.95 Ex Tax: $34.95
Adjusting Stripper/Cutter
These wire strippers/wire cutters from Velleman are a super valuable and convenient tool f..
$4.95 Ex Tax: $4.95
Beginner Tool Set
Everybody needs to start somewhere – and that phrase absolutely applies to elec..
$40.95 Ex Tax: $40.95
Brass Cleaning Sponge
Made of low abrasive brass shavings. This sponge won't damage your soldering tips. A c..
$6.00 Ex Tax: $6.00
Brushes
Nylon or steel bristles for cleaning and polishing. The nylon brush can be used alone or w..
Price : $2.60 Ex Tax: $2.60
Center Punch
Use this to locate a hole, and your drill won't "walk."Starrett #117C ..
$9.75 Ex Tax: $9.75
Chain-Nose 3000
Good quality lap-joint tool for a beginner at an affordable price. (China) ..
$6.00 Ex Tax: $6.00
Chain-Nose 3001
Also a beginner- level tool, box-joint construction for better mechanical stability. (China) ..
$7.25 Ex Tax: $7.25
Chain-Nose 3002
Stainless steel, box-joint construction. An affordable professional-quality tool. (Pakista..
$11.95 Ex Tax: $11.95
Chain-Nose 3004
Lap-joint construction. Durable, professional-quality. (Germany) ..
$15.25 Ex Tax: $15.25
Chain-Nose 3005
Box-joint construction, professional-quality. I use these.(Germany) ..
$21.50 Ex Tax: $21.50
Circle and Straight-Edge Cutter #678-01
Use with the cutting bit #561 to cut precise circles in sheet materials. Click the title for a pic. ..
$8.95 Ex Tax: $8.95
Circuit Board Clamping Kit
Inexpensive, flexible and stable jig for holding a board up to 7.87 x 5.51 in., rotates 36..
$12.75 Ex Tax: $12.75
Dedeco Large Cutoff Wheels
Aluminum Oxide, click title for available sizes. WEAR GOGGLES WHEN USING THESE! ..
Price : $0.65 Ex Tax: $0.65