4ms Looping Delay

4ms Looping Delay

Do-It-Yourself Kit for the Looping Delay module.

Crystal-clear clock-synced delay for looping up to 90 seconds, echoes, sound-on-sound, Karplus-Strong synthesis, and more.

DIY Kit:

• Easy assembly: all through-hole components. No SMT or wiring
• Perfect kit for beginners and experts alike
• 48kHz, 24-bit low-noise audio: same hi-fidelity as other 4ms modules
• DSP chips and processor are pre-soldered onto a separate plug-in board

Features

• Loop or echo time is synchronized to a clock
• 87 seconds of delay/loop time maximum
• 48kHz/24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
• Extremely quiet, low noise and low jitter design
• Tap tempo button and clock Ping input set the basis for one "beat"
• Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
• Sample-accurate clock output for perfect synchronization
• Loop clock output
• Time switches change range of Time knob from 1/8th notes up to 32 bars
• Digital feedback, up to 110%
• Delay Feed control, independent of dry/wet signal mix
• Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
• Reverse mode plays memory contents backwards
• With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
• Trigger inputs for toggling Infinite Hold and Reverse
• Send and Return for applying effects to feedback with external modules
• CV jacks to control Time, Level, Feedback and Dry/Wet Mix
• 16HP Eurorack module

Included with the DIY Looping Delay Kit:

• Main PCB
• Faceplate
• All components required for assembly (resistors, capacitors, diodes, ICs, sockets, headers, jacks, buttons, potentiometers, knobs)
• Pre-programmed and pre-soldered "DSP Brain-Board"
• SD adaptor
• 16-to-16 pin power cable
• M3 screws

Required for assembly:

• Soldering iron
• Solder
• Snips

Electrical and Mechanical Specifications:

• Module Size:
  • 16 HP Eurorack format module
  • 16-pin Eurorack power header
  • 1.3" (33mm) maximum depth with power cable
• Power consumption:
  • +12V: 110mA
  • -12V: 45mA
  • +5V rail: not used
  • Connect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12V and POWER